Hello Guest

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - MegaStar

Pages: [1] 2 3 4 5 6 7 8 9 10 11 ... 79
1
The player was banned, thanks for reporting.

2
abuse reports / Re: ? | [#30] | Babel | 28/06/2018 | 20:29 (GMT) | ESP
« on: June 28, 2018, 11:40:10 AM HST »
The video is not available, maybe you have put it in private.

3
abuse reports / Re: Grant
« on: June 19, 2018, 10:11:49 PM HST »
The player was banned,  thanks for reporting.

4
abuse reports / Re: AceOfCombat
« on: June 14, 2018, 05:05:21 PM HST »
The player was bsnned,  thanks for reporting.

5
abuse reports / Re: killer & sociallyakward
« on: June 12, 2018, 08:55:23 PM HST »
Both players were banned, thanks for reporting.

6
abuse reports / Re: XleoX
« on: June 10, 2018, 08:33:51 PM HST »
The player was banned,  thanks for reporting.

7
the cute lil workshop / [GAME MODE] versus
« on: June 10, 2018, 06:54:09 PM HST »
Game mode: Versus

Commands:
- /versus <player> <number of kills (default is 20)>
- /accept <player>

- To challenge a player you should use the command /versus <name or #ID> <number of kills> (example: /versus #2 30)
- Once you challenge a player, that player will receive a message saying that you are challenging them.

- When you want to accept a versus, you must put /accept <player> (example: /accept #1), when you accept the challenge, all the players that are in the server will automatically join the spectator team at the exception of you and the challenger.
- Those who are in the spectator team will not be able to join any team and will not be able to use the /versus or /accept commands until the versus is over.

- When you accept the versus, you and the challenger will join a random team, either blue or green (this is to avoid if both the challenger and you are on the same team)
- There will be a count remain of 5 seconds, when reaching 0 a message will be sent saying the following:


"The versus (your nick) and (nick of the challenger) have started!"
"The player who reaches (maximum kills to win the versus) kills is the winner!"

- The script every 30 seconds will show the current kills of both players:

"(Player (nick of the challenger): kills: (kills of challenger)) --- (Player (your nick): kills: (your kills))
"Goal of versus: (maximum kills to win the versus) kills!"


- When a player is the winner, the script will send a message saying:

"(nick of the winner) is the winner!"
"#########"
"######"
"###"

- When finishing the versus again the team's will be unblocked and it will be possible to start again a new versus.
- When a player, whether you or the challenger, leaves while the versus has not ended, a message will be sent saying that the Versus has not ended for the reason that the (player) retired while the Versus had not yet finished and everything will be unblocked again so the players can choose a new versus again.

- The players will not be able to kill, destroy and build, all this will be enabled only when a versus has started therefore only the players of that current "versus" will be able to build, destroy and kill, everything will be disabled when the versus has finished.

Demonstration:



Perfect maps for this game mode, they would be assault and pinpoint, you can also use small maps.

8
abuse reports / Re: [KLM]Fantasma
« on: June 08, 2018, 05:17:59 PM HST »
The player wad banned,  thanks for reporting.

9
the cute lil workshop / [SCRIPT] Build
« on: June 08, 2018, 04:10:38 PM HST »
Game mode: Build
There are no killings, only construction (the name says it :P)
There is a glitch in which is that you can destroy unbreakable blocks (I will not say how it is done) but in this script that glitch/bug does not work.

Commands:
/claim: Claim a sector (you can only claim 1)
/sector: If you are far from your sector and want to teleport to your sector, just use this command.
/removeclaim <player>: (only for administrators)
/ask <player> <question (optional)>: Ask the player if you can destroy their blocks.
/allow <player>: Allow a player to destroy your blocks.
/remove <player>: Revoke the player's permission so that he can no longer destroy your blocks.


/claim:
How to use it: You must put the command /claim and choose the place where you want to have your sector, if you want to choose the color of your sector you should only change the color of the block you have, once you have chosen the place and the color only you should hit the block that is at your feet.
-The claim will not work if you choose a sector that is in the range of another sector, you must ecoger a good sector.
-The default of the size of a sector is 20x20 cubes, no one can place or destroy any block that is within your sector (claim) either up or down (it could be said that your sector has the shape of a perfect quadrangular prism)
-If any player has permission to destroy your blocks (/allow), anyway he will not be able to place or destroy any block in your sector since the sector is only for you but  he can break your blocks that are outside your sector.

-If you want to change the size of the sector per player (I do not recommend it) you must open the script and in line #15 (RANGE_CLAIM = 10) you must keep in mind that the number you put in RANGE_CLAIM will be multiplied by 2, suppose that you put 15:
RANGE_CLAIM = 15
therefore the sector size per player will be 30x30 blocks (cimetric base).

/sector:
How to use it: You must put the command /sector and you will automatically teleport to your sector, this can be useful if you are in another place and want to return quickly to your sector.

/removeclaim:
How to use it: You must put the command /removeclaim <player name or #ID> (example. /removeclaim MegaStar)
-This command will allow you to remove the sector of a player, keep in mind that when removing the sector of a player, that player can choose a sector again.
-If the <player> does not have any sector, the command will not run and the script will send you a message saying "the player (player name) does not currently have a sector."
-This command can only be used by administrators.
-If the sector of the <player> is removed successfully, that sector will count as null, therefore they will be able to build and destroy since the sector will not exist.

/ask:
How to use it: You must put the command /ask <player name or #ID> <question (optional)> (example: /ask # 2 can I help you?)
-If nothing is passed in <question> the default question will be "can I destroy your blocks?".
-When the command is used, the <player> will receive that message and decide if he will let you destroy his blocks.

/allow:
How to use it: You must put the command /allow <player or #ID> (example: /allow MegaStar)
-If the <player> currently already has permission to destroy your blocks, the script will send you a message saying "The player currently has the permission to destroy your blocks."
-When a player asks you something with /ask, to accept it you only have to put /allow <player name or #ID> and automatically the player can destroy your blocks.

/remove:
How to use it: You must put the command /remove <player or #ID> (example: /remove # 2)
-This command will allow you to remove the privilege to a player who previously you gave him the permission (/allow) to destroy your blocks.
-If the <player> currently does not have permission to destroy your blocks, the script will send you a message saying "The player (player name) can not currently destroy your blocks."

/fly:
-To activate/deactivate the flight

Demonstration:


Consider the following:
-You can only destroy your blocks and the blocks of the player who gave you permission (/allow)
-You can not destroy blocks that are in other sectors (only administrators can do it)
-You can not claim more than 1 sector.
-When you choosing a sector, the area of ​​the sector will be painted with color of the block you are using.
-You have infinite cubes
-The weapons, grenades and spade do not cause damage.
-You can not kill.
-Grenades can not destroy blocks.

I modify some scripts a bit, so they can work with this script.
-The paint.py script was modify it so that you can only paint your blocks, you can not paint the blocks of other players or the blocks of the map. (use it plz)
-The sculpt.py script will only allow you to destroy the blocks of the map, yours and those of your sector, if a player gave you permission to destroy their blocks (/allow), you can also destroy their blocks with the sculpt.

Caution:
-I recommend that the commands: /box, /db, /df, /dw and /wall should only be used by the players that are trustworthy to you, this will avoid the misuse of commands.
-I will put the map I am using in the video (the map is great for a build server) along with the scripts + a config.txt that you can use it on your build server, you just have to change the passwords.

The commands /paint, /rapid /gr(gradient commands) and /sculpt can be used by any player.
 
Thanks.

10
abuse reports / Re: nel & marlonpr97
« on: June 08, 2018, 03:28:55 PM HST »
Both players were banned, thanks for reporting.

Pages: [1] 2 3 4 5 6 7 8 9 10 11 ... 79